Erreka RINO Serie Manual Del Instalador página 59

Mount the magnetic limit switches
1 Move the gate manually to the opening position,
and position the opening magnet (1) with the
respective magnet-holder plate (2).

In the gate open position, the magnet (1) must
be opposite the magnetic opening limit switch
(reed) (3).

The distance between the magnets and the
operator frame must be at least 5 mm.
2 Move the gate manually to the closing position, and
position the closing magnet (4) with the respective
magnet-holder plate (5).

In the gate closed position, the magnet (4) must
be opposite the magnetic closing limit switch (reed)
(6).

The distance between the magnets and the
operator frame must be at least 5 mm.
3 Lock the operator using the handle (7).
INSTALLATION
RINO operator for sliding gates
55