INSTRUCTION MANUAL
Location's
geographic latitude
0° a 10°
11° a 20°
21° a 30°
31° a 40°
IMPORTANT: The Triangular Bracket comes from the factory with the possibility of forming angles from 20°
to 35°. If using smaller angles, it will be necessary to reduce the vertical rod as shown in the figure below.
Warning for installation dimensions
It is possible to install the Thebe Panel Support with various mounting dimensions without compromising the
rigidity of the structure. All dimensions of the installation are subject to variations, depending on the specific
drawings of each project. This installation instruction is used only as a description of the product installation
method and also contains some measurement suggestions.
Installation Instructions
Triangular Bracket Fixation
A. According to the project plan,
fix the triangular bracket based
on the positions of the holes on
the base where it will be installed.
Note: Use anchor bolts with a
minimum thread specification of
3/8" and a length of 63mm for
foundation fixing (not included in
the package).
57
Recommended tilt angle
α = 10°
α = latitude
α = latitude + 5°
α = 35°
EBARA BOMBAS AMÉRICA DO SUL LTDA.
3TSM ci/ce and 4TSM ci
Models