Identification Labels; Receiving And Storage - WEG CFW500 Manual Del Usuario

2.4 IDENTIFICATION LABELS

There are two identification labels, one complete nameplate, located on the side of the inverter
and a simplified label under the plug-in module. The label under the plug-in module allows the
identification of the most important characteristics of the inverter even in inverters mounted
side-by-side. For further details about the position of the labels, see
Serial number
Production order
Rated input data
(voltage, current
and frequency)
Stock item
Serial number
Front label of the CFW500 (Under the Plug-In Module)
Figure 2.3: Description of the identification labels on the CFW500

2.5 RECEIVING AND STORAGE

The CFW500 is supplied packed in a cardboard box. On this package, there is an identification
label which is the same as the one attached to the side of the inverter.
Check if:
The identification of the CFW500 matches the model purchased.
„
Any damages occurred during transportation.
„
Report any damage immediately to the carrier.
Side label of the CFW500
General Information
Figure A.2 on page 143.
Model (Smart code
of the inverter)
Manufacturing date
WEG stock item
Rated input data
(voltage, current
and frequency)
Model (Smart code
of the Inverter)
Manufacturing date
CFW500 | 9