Operating Modes Of The Hmi - WEG CFW500 Manual Del Usuario

4.3 OPERATING MODES OF THE HMI

The monitoring mode allows the user to view up to three variables on the main display, secondary
display and bar graph. Such fields of the display are defined in
The setting mode is composed of three levels: Level 1 allows the user to select the Menu
items to direct the browsing of the parameters. Level 2 allows browsing the parameters of the
group selected by level 1. Level 3, in turn, allows the modification of the parameter selected in
Level 2. At the end of this level, the modified value is saved or not if the key ENTER or ESC is
pressed, respectively.
Figure 4.3 on page 27 illustrates the basic browsing of the operating modes of the HMI.
It is the initial status of the HMI after the
„
powering up and of the initialization screen,
with default values
The field Menu is not active in this mode
„
The main display, secondary display and bar
„
graph indicate the values of three parameters
predefined by P0205, P0206 and P0207
From the monitoring mode, when you press
„
the key ENTER/MENU, you commute to the
setting mode
Level 1:
This is the first level of the setting mode. It is
„
possible to choose the parameter group using
the keys and
The main display, secondary display, bar
„
graph and measurement units are not shown
in this level
Press the key ENTER/MENU to go to level
„
2 of the setting mode - parameter selection
Press the key BACK/ESC to return to the
„
monitoring mode
Level 2:
The number of the parameter is shown on the
„
main display and its content on the secondary
display
Use the keys and
„
parameter
Press the key ENTER/MENU to go to level
„
3 of the setting mode - modification of the
parameter content
Press the key BACK/ESC to return to level 1
„
of the setting mode
Level 3:
The content of the parameter is shown on the
„
main display and the number of the parameter
is shown on the secondary display
Use the keys and
„
new value for the selected parameter
Press the key ENTER/MENU to confirm the
„
modification (save the new value) or BACK/
ESC to cancel the modification (not save the
new value). In both cases, the HMI returns to
level 2 of the setting mode
Monitoring Mode
Setting Mode
to find the desired
to configure the
Figure 4.3: Operating modes of the HMI
HMI (Keypad) and Basic Programming
Figure 4.2 on page
BACK
ESC
BACK
ESC
BACK
ESC
26.
Monitoring
ENTER
MENU
Setting
Level 1
ENTER
MENU
Setting
Level 2
ENTER
MENU
Setting
Level 3
CFW500 | 27