Publicidad
Idiomas disponibles
Idiomas disponibles
1.2 Installation warnings
Before using your fridge freezer for
the first time, please pay attention to
the following points:
• The operating voltage for your fridge
freezer is 220-240 V at 50Hz.
• The plug must be accessible after
installation.
• Your fridge freezer may have an
odour when it is operated for the first
time. This is normal and the odour will
fade when your fridge freezer starts to
cool.
• Before connecting your fridge freezer,
ensure that the information on the
data plate (voltage and connected
load) matches that of the mains
electricity supply. If in doubt, consult a
qualified electrician.
• Insert the plug into a socket with an
efficient ground connection. If the
socket has no ground contact or the
plug does not match, we recommend
you consult a qualified electrician for
assistance.
• The appliance must be connected
with a properly installed fused socket.
The power supply (AC) and voltage at
the operating point must match with
the details on the name plate of the
appliance (the name plate is located
on the inside left of the appliance).
• We do not accept responsibility for
any damages that occur due to
ungrounded usage.
• Place your fridge freezer where it will
not be exposed to direct sunlight.
• Your fridge freezer must never be
used outdoors or exposed to rain.
• Your appliance must be at least 50 cm
away from stoves, gas ovens and
heater cores, and at least 5 cm away
from electrical ovens.
• If your fridge freezer is placed next to
a deep freezer, there must be at least
2 cm between them to prevent
humidity forming on the outer
surface.
• Do not cover the body or top of
fridge freezer with lace. This will
affect the performance of your fridge
freezer.
• Clearance of at least 150 mm is
required at the top of your appliance.
Do not place anything on top of your
appliance.
• Do not place heavy items on the
appliance.
• Clean the appliance thoroughly
before use (see Cleaning and
Maintenance).
• Before using your fridge freezer,
wipe all parts with a solution of
warm water and a teaspoon of
sodium bicarbonate. Then, rinse with
clean water and dry. Return all parts
to the fridge freezer after cleaning.
• Use the adjustable front legs to
make sure your appliance is level
and stable. You can adjust the legs
by turning them in either direction.
This must be done before placing
food in the appliance.
If your refrigerator includes a
fan condenser
- The bottom cabinet cover is the
plastic
The condenser of your fridge is
located at the bottom of the
cabinet. As a result, the fittings
which control the distance
between the refrigerator and the
wall behind your fridge are
located on the cover of the
bottom of the cabinet. You can
move your fridge toward the back
wall until this point.
Plastic for distance setting
EN - 77
V.2
Publicidad
