EAS ELECTRIC EMC197ASDX Manual De Instrucciones página 94

7 BEFORE CALLING AFTER-SALES SERVICE
Errors
Your fridge will warn you if the temperatures for the cooler and freezer are at
improper levels or if a problem occurs with the appliance. Warning codes are
displayed in the freezer and cooler indicators.
ERROR TYPE
E01
E02
E03
E06
E07
E08
E09
MEANING
Sensor warning
Sensor warning
Sensor warning
Sensor warning
Sensor warning
Low Voltage
Warning
Freezer
compartment is
not cold enough
WHY
Power supply to
the device has
dropped to
below 170 V.
Likely to occur after
long term power
failure.
EN - 94
WHAT TO DO
Call Service for assistance
as soon as possible.
Call Service for assistance
as soon as possible.
Call Service for assistance
as soon as possible.
Call Service for assistance
as soon as possible.
Call Service for assistance
as soon as possible.
- This is not a device failure,
this error helps to prevent
damages to the compressor.
- The voltage needs to be
increased back to required
levels
If this warning continues an
authorised technician needs
to be contacted.
1. Set the freezer temperature to a
colder value or set Super
Freeze. This should remove the
error code once the required
temperature has been reached.
Keep doors closed to improve
time taken to reach the correct
temperature.
2. Remove any products which
have thawed/defrosted during
this error. They can be used
within a short period of time.
3. Do not add any fresh produce
to the freezer compartment
until the correct temperature
has been reached and the error
is no longer.
If this warning continues an
authorised technician needs
to be contacted.
V.2