Hilti Profis Layout Data Output (Export); Hilti Profis Layout Data Input (Import); Calibration And Adjustment; In-The-Field Calibration - Hilti POS 15 Manual De Instrucciones

NOTE
No provision has been made for direct data exchange between the total station and other PC systems, this can be
done only by using Hilti PROFIS Layout.

14.2.2 Hilti PROFIS Layout data output (export)

Data is saved in the following applications and can be exported with the aid of Hilti PROFIS Layout in various formats:
1. Horizontal layout
2. Vertical layout
3. As-built
4. Measure and record
5. Area measurement (calculation)
Data output
Hilti PROFIS Layout reads the data saved by the total station and extracts the following data.
1. Point name, horizontal angle, vertical angle, distance, reflector height, tool height
2. Point name, E(Y) coordinate, N(X) coordinate, height
3. Application results such as differences in layouts and area measurements
Output formats
CSV format
Text format
DXF format
DWG format

14.2.3 Hilti PROFIS Layout data input (import)

Data input
Using Hilti PROFIS Layout, the following data can be read, converted and transferred to the total station directly by
cable or on a USB memory device:
1. Point names (fixed points) with coordinates and heights.
2. Polylines (lines, curves) from other systems
Input formats
CSV format
txt format
Text format
DXF format
DWG format

15 Calibration and adjustment

15.1 In-the-field calibration

The tool is correctly adjusted when supplied.
The values to which the tool is set may change over time or due to temperature fluctuations, transport or aging.
The tool therefore incorporates a feature that allows the settings to be checked and, if necessary, corrected by carrying
out in-the-field re-calibration.
This is done by setting up the tool securely on a tripod of good quality and targeting an easily visible, clearly discernible
object within ±3 degrees of horizontal at a distance of approx. 70 – 120 m. After this, a measurement is taken in
telescope position 1 and in telescope position 2.
Comma-separated values.
Gaps between data filled with spaces so that individual
data items appear in columns.
Text exchange format compatible with CAD.
Binary data format compatible with AutoCad.
Comma-separated values.
Space-separated values.
Gaps between data filled with spaces so that individual
data items appear in columns.
CAD drawing with lines and curves as general CAD
data exchange format.
CAD drawing with lines and curves as data exchange
format compatible with AutoCad.
en
89