Sicam JUMBO TCS52 NW Manual Original página 34

en �4 | ��M�� T�S�� �� | Decommissioning
7. Decommissioning
7.1 Place change
Procedure:
1. Disconnect electrical connection.
2. Follow what shown for first start up (see chap. 4.2).
i
In case of sale or transfer of JUMBO TCS52 NW, all
the documents included in the consignment volume
has to be integrally handed over together with the
equipment.
7.� Temporary decommissioning
If the JUMBO TCS52 NW is going to be stopped for a
limited period of time or if the equipment is not being
used for other reasons, always disconnect the network
plug from its socket!
It is suggested to clean accurately the
JUMBO TCS52 NW, also its tools and accessories, and
carry out a protection treatment (e.g. spraying of a thin
oil film).
7.� Disposal
¶
Disconnect the JUMBO TCS52 NW from the mains
tension and take off the power supply cable.
¶
Oil are water pollution risk fluids and have to be
disposed of in accordance with the rules in force.
¶
Disassemble the JUMBO TCS52 NW, order the
materials according to the category it belongs to and
dispose of them according to the rules in force.
��M�� T�S�� �� complies to the rules of
the European directive �00�/96/�E (directi-
ve on the disposal of electrical and electro-
nic waste).
Electric and electronic devices which are out
of order, together with their cables, accesso-
ries, accumulators and batteries, have to be
disposed of separately from household waste.
¶
For disposal of such products, use the
available return and collection systems.
¶
The correct disposal of the
JUMBO TCS52 NW makes it possible to
avoid environmental damage and to put at
no risk the life of people.
|
1 695 301 901 2011-07-14
8. Technical data
8.1 ��M�� T�S�� ��
Function
Maximum noise level
Working hydraulic pressure
Power supply tension
8.� Dimensions and weights
Function
JUMBO TCS52 NW (A x L x P)
Net weight
Gross weight
8.� Reach
Function
Tire width
Maximum tire diameter
Maximum tire width
Specifications
75 dB
20 – 130 bar
depending on the cho-
sen tension (see iden-
tification plate)
Specifications
1750 x 2200 x 1750 mm
882 kg
1003 kg
min / max
14"– 42" (with optional ex-
tension up to 56")
2300 mm
910 mm
Sicam srl società unipersonale