Installation; Technical Specifications - Lincoln Electric POWER MIG 216 Manual Del Usuario

A-1
TECHNICAL SPECIFICATIONS – POWER MIG® 216
Standard Voltage/Phase/Frequency
208/230/1/60 Hz
220/1/50 Hz
Duty Cycle
30%
40%
60%
Welding Current Range
30 – 250Amps
Input Voltage/ Fuse or Breaker
Frequency (Hz) Size (Super Lag)
208/60
230/60
220/50
Wire Speed
Height
With Coil Claw™
32.56 in.
827 mm
OPERATING TEMPERATURE RANGE
-4°F to 104°F(-20°C to +40°C)
*
23 Volts at 50 Hz.

INSTALLATION

INPUT – SINGLE PHASE ONLY
Input Current @ 170 Amp Rated Output Input Current @ 216 Amp Rated Output
RATED OUTPUT
Maximum Open Circuit Voltage
RECOMMENDED INPUT WIRE AND FUSE SIZES
Input Ampere
Rating On
Nameplate
(30% Duty Cycle)
50
50
50
WIRE SPEED RANGE
PHYSICAL DIMENSIONS
Width
Without Coil Claw™
20.12 in. 19.15 in.
512 mm 487 mm
TEMPERATURE RANGES
POWER MIG® 216
33/29 Amps
30 Amps
Amps
216 Amps
190 Amps
170 Amps
OUTPUT
36 Volts
40A
36A
37A
50 – 700 IPM (1.27 – 17.8 m/minute)
Depth
With Gun and Cable Without Gun and Cable
and Work Cable
39.92 in.
1014 mm
STORAGE TEMPERATURE RANGE
-40°F to 185°F(-40°C to +40°C)
40/36 Amps
37 Amps
Volts at Rated Amperes
22 Volts
23 Volts
*
24 Volts
Welding Voltage Range
13-24 Volts
Power Cord
50 Amp, 250V
Three Prong Plug
(NEMA) Type 6-50P)
Weight
and Work Cable
215.5 Ibs. 206.5 lbs.
97.8 kg. 93.7 kg.
A-1