Air Cleaner Features; Air Cleaner Set-Up; Display Panel - Winix PlasmaWave 5300 Manual De Usuario

AIR CLEANER FEATURES

NOTE: The features of your air cleaner may vary according to model.
• Ultra-Quiet Operation
This Winix air cleaner has a multi-
speed fan with ultra-quiet operation that
is ideal for nighttime operation.
• Easy Maintenance
Winix air cleaners are simple and
economical to maintain. For optimum
performance, replace True HEPA Filter
when REPLACE FILTER indicator light
is on. Change Carbon Filter every three
months
• Air Quality Sensor
The 5300 air cleaner is equipped
with a digital sensor, that automatically
monitors air quality. Fan speeds will
adjust automatically.
• Simple Operation
The Winix 5300 air cleaner has a remote
control and user-friendly display for your
convenience.
• Energy Savings
When set on Energy Savings mode, fan
speed will not increase above level three.
Winix air cleaners are Energy Star
compliant.
FRONT SIDE
PlasmaWave
Power Plug
MULTI-STAGE CLEANING
Air undergoes three separate processes
before returning, freshened and cleaned,
to the room.
• Carbon Filter
Very effective Carbon Filter sheet collects
large particles, dust, pollen, pet hair, and
lint as well as odors caused by cigarette
smoke, organic decay, and cooking.
• True HEPA Filter
Captures 99.97% of particles and
impurities as small as .3 microns
including smoke, dust, pollen,
mold spores, and pet dander.
• PlasmaWave™
In the final stage of cleaning, Winix
PlasmaWave TM technology generates
both positive and negative ions to create
plasma clusters which instantly neutralize
viruses, bacteria, chemical vapors and
odors in the air.
TM

Display Panel

DC Motor
True HEPA Filter
Carbon Filter
Front Panel
TOP SIDE
Air Outlet
4
NOTE: Follow these instructions
for best results.
• Place unit at least 7 feet from equipment
that emits electric waves such as
televisions or radios.
• Place unit at least 2 feet from the wall.
• Keep sensors away from drafty areas.
• Keep curtains away from sensors, as
they may interfere with air intake/outlet.
• Place unit on a stable surface with plenty
of air circulation.
1. Remove protective film from the
control panel.
2. Remove the front
panel by grasping
the bottom outside
edges and gently
pulling toward you.
3. Pull out the filter
package and
remove the
shipping wrapper
Remote
Control
Cradle

AIR CLEANER SET-UP

5. Return the filters
into the main unit;
the Carbon Filter
should be in front of
the True HEPA filter.
6. Replace the front panel
by hooking the front
panel on the top of the
unit. Swing panel in by
pushing gently until the
panel snaps into place.
7. Plug in the power cord to a wall outlet.
8. Press POWER button until short
"beep" is heard.
For the first 4 minutes after turning the
unit on, the dust and odor indicators will
flash while the unit measures air quality.
5