Sleep Mode; Power Mode - Winix PlasmaWave WAC-5000B Manual De Usuario

1
1. DUST & ODOR SENSORS -
Automatically monitor air quality and
adjust fan speed accordingly.
2. REPLACE FILTER INDICATOR - The
indicator will signal when to replace the
filter cassette.
3. TIMER - Indicates timer setting or
continuous mode.
4. FAN SPEED INDICATOR - Shows
current fan speed setting.
DISPLAY PANEL (5000 and 5000S)
3
2
5
4
5. SLEEP MODE - The unit will work on
Ultra-Quiet mode and dim the control
panel lights.
6. AUTO (NORMAL/ENERGY SAVE) -
The unit is set to default to NORMAL
(Automatic operation) when it is first
turned on. Smart sensors will automati-
cally sense the amount of impurities in
the air, and adjust the fan speed accord-
ingly. When set on ENERGY SAVE
mode, fan speed will not increase
above level three.
7. PLASMAWAVE
the Plasma generator by pressing the
PLASMA button on the remote or the
POWER button on the unit.
8. POWER MODE - Turn unit on/off,
change mode between Energy save
mode, and change the fan speed by
pressing the POWER/MODE button.
6
6
7
ON/OFF - Turn on
TM
8
1