IWC Schaffhausen AQUATIMER DEEP THREE Instrucciones De Manejo página 30

When diving, the blue depth indicator (8) shows the current depth, which can be
read off on the dive depth scale (7). The red maximum depth indicator (9) moves in
sync with the depth indicator during the descent. During ascent, the maximum depth
indicator continues to show the maximum depth achieved while the depth indicator
moves back towards zero as depth decreases. The maximum depth indicator can be
reset by pushing the reset push­button (12).
To avoid damage, the depth gauge is mechanically disengaged below depths of
approximately 50 metres. Depths beyond this limit are no longer indicated (13).
F U N C T I O N O F T H E D E P T H G A U G E
A D J U S T I N G T H E D E P T H G A U G E
The depth gauge can be set to zero to correct fluc­
tuations in atmospheric pressure by turning the ad­
justment crown (11). This correction should be made
before every dive. To adjust the watch as precisely
as possible, proceed as follows: First set the depth
gauge to a value below zero (for example –2 metres).
Then reset the maximum depth indicator (press the
reset push­button (12)). By turning the adjustment
crown (11), the depth gauge can now be set to zero.
A Q U A T I M E R D E E P T H R E E
— 3 0 —