Publicidad
Idiomas disponibles
Idiomas disponibles
2. Cleaning
Confirm the accessory parts inside the refrigerator and wipe the inside with a soft cloth.
3. Power-on
Insert the plug into the solid socket to start the compressor. After 1 hour, open the refrigerator door,
if the temperature inside the refrigerator compartment drops obviously, it indicates the refrigeration
system is working normally.
4. Storage of food
After the refrigerator runs for a period of time, the internal temperature of the refrigerator will be
automatically controlled according to the user's temperature setting. After the refrigerator is fully
cooled, put in foods, which usually need 2~3 hours to be fully cooled. In summer, when the
temperature is high, it takes more than 4 hours for the foods to be fully cooled (Try to open the
refrigerator door as less as possible before the internal temperature cools down).
If the refrigerator is installed in the moisture place, make sure to check whether the ground
wire and leakage circuit breaker are normal. If vibration noises are produced due to the
refrigerator contacting the wall or if the wall gets blackened by air convection around the
compressor, move the refrigerator away from the wall. Setting up the refrigerator may cause
jamming noise or image chaos to the mobile phone, fixed-line telephone, radio receiver, television
surrounding it, so try to keep the refrigerator as far away as possible in such case.
FUNCTIONS
The display panel is illustrated as following:
CAUTION: This is a convertible refrigerator that can function either as a freezer or a
fridge. Please check whether it is set at the freezer mode or the fridge mode when
powering it on.
When the refrigerator system is connected to power supply for the first time, all icons on the display
panel gets illuminated for 2s, and the system runs in the freezer mode at -18℃ by default. When all
47
Publicidad
