Chauvin Arnoux SIMPLE LOGGER II Serie Manual De Usuario página 42

SIMPLE LOGGER II English
2.2.2 Model CL601, clamp-on ammeter
1. Command button (« PRESS »)
The button marked "PRESS" is used to choose the operating mode: start or stop recording, erase the
memory, clear alarms, start or stop the device.
2. Five LED indicators
The indicators have two distinct information functions: choice of command to be executed or active function
in progress.
The command to be executed (reached by pressing the "PRESS" button until the desired command appears)
is indicated to the left of the indicator.
The active function or current status (obtained by a brief press on the "PRESS" button) is indicated to the
right of the indicator.
Section 4.1 describes each of the indicators in detail.
3. Mini-B female USB connector
This connector, on the base of the device, is used for connection to a desktop computer.
4. Guard
Marks the end of the part intended to be held in the hand. Keep your hands and fingers behind the guard
when in operation or when placing or removing the clamp.
5. « RESET » button (not shown)
The "RESET" button, used to reset the processor, is located in the battery compartment. To reach it, simply
remove the cover of the battery compartment. The button is located to the left of the batteries.
Page 42