Stahlwille Manoskop 730D Serie Instrucciones De Servicio página 41

EN
Extension correction
The torque wrench is set to the standard extension.

With square insert 912=17.5 mm

With square insert 1418=25.0 mm

With square insert 2228=55,0 mm
This function can be used to correct socket tools with
a deviating extension.
WA RNING
Risk of injury due to incorrectly
tightened threaded connections.

Check the extension in the case of each socket
tool which is used.

Set the extension correctly in the extension
correction menu.

Use a calliper gauge to determine the extension S,
as shown in the illustration.
In the case of combinations of socket tools and
adapters, the sum of all extensions must be taken into
consideration.

To select the extension correction menu item,
press the F button until the "double arrow" symbol
is displayed.
"On" or "OFF" flashes.

If you wish to work without extension correction,
use the arrow buttons to select "OFF".

If you wish to work with extension correction, use
the arrow buttons to select "On".

Press the F button.

Use the arrow buttons to set the desired extension
in milimetres.

A extension correction which has been set can
be recognized by the "double arrow" symbol in
the display.

Save the setting as described on page 13.
Automatic taring
This function can be used to set whether the torque
wrench is to subsequently tare itself automatically.

To select the automatic taring menu item, press the
F button until the "TARA!" symbol is displayed.
"On" or "OFF" flashes.

In order not to subsequently tare the torque wrench
automatically, use the arrow buttons to select
"OFF".

In order to subsequently tare the torque wrench
automatically, use the arrow buttons to select "On".

Automatic taring can be recognized by the
"TARA!" symbol in the display.

Save the setting as described on page 13.
Switching on the key lock
This function can be used to lock the setting options
for users who do not have access to the PIN code.

To select the key lock menu item, press the F
button until the "Key" symbol is displayed.
"On" or "OFF" flashes.

To work without the key lock, use the arrow buttons
to select "OFF".

To switch on the key lock, use the arrow buttons to
select "On".

When you have switched on the key lock, you
cannot change settings without entering the PIN
code. In delivery condition, the PIN code is
"0000".

When set, the key lock can be recognized by
the "Key" symbol in the display.

Save the setting as described on page 13.
15