•
Set the dispenser selector (4) to position
'D'. The start/stop button (2) flashes green.
•
Press the start/stop button (2). The coffee
dispenser (5) is being rinsed.
•
If the start/stop button (2) flashes green,
place the mug under the hot water
dispenser (7).
•
Set the dispenser selector (4) to position
'B'. The start/stop button (2) flashes green.
•
Press the start/stop button (2). The hot
water dispenser (7) is being rinsed.
•
If the start/stop button (2) flashes green,
place the mug under the steam outlet (26).
•
Set the dispenser selector (4) to position
'C'. The start/stop button (2) flashes green.
•
Press the start/stop button (2). The steam
outlet (26) is being rinsed.
•
If the start/stop button (2) flashes green,
place the mug under the coffee dispenser
(5).
•
Set the dispenser selector (4) to position
'D'. The start/stop button (2) flashes green.
•
Press the start/stop button (2). The coffee
dispenser (5) is being rinsed.
•
If the start/stop button (2) flashes green,
place the mug under the hot water
dispenser (7).
•
Set the dispenser selector (4) to position
'B'. The start/stop button (2) flashes green.
•
Press the start/stop button (2). The hot
water dispenser (7) is being rinsed.
•
If the start/stop button (2) flashes green,
place the mug under the steam outlet (26).
•
Set the dispenser selector (4) to position
'C'. The start/stop button (2) flashes green.
•
Press the start/stop button (2). The steam
outlet (26) is being rinsed.
•
If the start/stop button (2) flashes green,
place the mug under the coffee dispenser
(5).
•
Set the dispenser selector (4) to position
'D'. The start/stop button (2) flashes green.
•
Press the start/stop button (2). The coffee
dispenser (5) is being rinsed.
Finalisation (fig. L)
•
Rinse the steam valve (24).
•
Manually screw the steam valve (24) back
to the steam outlet (26).
Assembly
Warning! Before assembly, always switch off
the appliance and remove the mains plug from
the wall socket.
Mounting the drip tray and the
cup tray (fig. M)
•
Place the drip tray (12) in the bottom of the
appliance.
•
Place the cup tray (11) above the drip tray
(12) in the bottom of the appliance.
Mounting the coffee dispenser
(fig. N & O)
•
Place the coffee dispenser filter (6) in the
coffee dispenser (5).
•
Mount the coffee dispenser (5) to the
appliance by turning it counterclockwise.
Mounting the coffee pad cassette
•
If you use coffee pads, refer to the chapter
"Making coffee with coffee pads".
•
If you use ground coffee, refer to the
chapter "Making coffee with ground coffee".
Mounting the milk frothing unit
(fig. K)
•
Slide the flexible tube (21) over the tube
adapter (22).
•
Insert the tube adapter (22) into the milk
froth dispenser adapter (23).
•
Mount the milk froth dispenser adapter (23)
to the steam valve (24).
•
Mount the milk froth dispenser (8) to the
milk froth dispenser adapter (23).
Troubleshooting
Refer to the table below to solve problems
yourself. If you are not able to solve the
problem yourself, contact our service station.
25