Cherubini BLUE BUS TDS Serie Instrucciones página 34

WIND- AND SUN SENSOR WINDTEC/WINDTEC LUX (BLUE BUS TDS RX)
WINDTEC* - Ref. A520007
To associate the sensor to the control unit, a remote control must be already memorized.
The setting sequence is the following:
A
+ B
To delete the sensor from the control unit, an already programmed remote control must be used.
The deleting sequence is the following:
A
+ B
*For the complete description of the functions of this device see the instruction booklet that came in
the box.
WINDTEC LUX* - Ref. A520008
SETTING THE WIND SENSOR
B
DELETING THE WIND SENSOR
A
34
set
Set button
Wind-speed
tuning
set
2 sec
set
2 sec
Sun-sensor
tuning