Cherubini BLUE BUS TDS Serie Instrucciones página 37

It detects movements caused by the wind on the awning arms and also any accumulation of water or
snow on the fabric.
MISTRAL*- Ref. A520012
To associate the sensor to the control unit, a remote control must be already memorized. Set the selector
to the 0 position and then perform this sequence:
A
+ B
To delete the sensor from the control unit, an already programmed remote control must be used. Set
the selector to the 0 position; if active wait for the sensor to go off and then perform this sequence:
I
A
+ B
*For the complete description of the functions of this device see the instruction booklet that came in
the box.
MISTRAL SENSOR (BLUE BUS TDS RX)
SETTING THE MISTRAL SENSOR
B
DELETING THE MISTRAL SENSOR
A
37
SET BUTTON
LED
SELECTOR
set
2 sec
set
2 sec