Lowara NSC2 Manual De Instalación, Funcionamiento Y Mantenimiento página 14

en - Original instructions
bed in the sales document. Special version pumps
may be supplied with supplementary instruction leaf-
lets. Refer to sales contract for any modifications or
special version characteristics. For instructions, sit-
uations, or events that is not considered in this man-
ual or the sales document, contact the nearest Serv-
ice Center.
1.3 Disposal of packaging and product
Observe the local regulations and codes in force re-
garding sorted waste disposal.
1.4 Warranty
For information about warranty, see the sales con-
tract.
1.5 Spare parts
WARNING:
Only use original spare parts to replace
any worn or faulty components. The use
of unsuitable spare parts may cause
malfunctions, damage, and injuries as
well as void the guarantee.
CAUTION:
Always specify the exact product type
and part number when requesting techni-
cal information or spare parts from the
Sales and Service Department.
For more information about the product's spare
parts, visit sales network's website.
1.6 DECLARATIONS OF CONFORMITY
1.6.1 EC Declaration of Conformity
(Original)
Xylem Service Italia S.r.l., with headquarters in Via
Vittorio Lombardi 14 - 36075 Montecchio Maggiore
VI - Italy, hereby declares that the product:
Electric pump unit (see label on first page)
fulfills the relevant provisions of the following Euro-
pean directives:
• Machinery 2006/42/EC (ANNEX II - natural or le-
gal person authorised to compile the technical
file: Xylem Service Italia S.r.l.)
• Eco-design 2009/125/EC, Regulation (EC) No
640/2009 & Regulation (EU) No 4/2014 (Motor 3
~, 50 Hz, PN ≥ 0,75 kW) if IE2 or IE3 marked,
Regulation (EU) No 547/2012 (Water pump) if
MEI marked
and the following technical standards
• EN ISO 12100:2010, EN 809:1998+A1:2009,
EN 60204-1:2006+A1:2009
• EN 60034-30:2009, EN 60034-30-1:2014
Montecchio Maggiore, 11.03.2016
Amedeo Valente
(Director of Engineering and
R&D)
rev.01
1.6.2 EU Declaration of Conformity (No
EMCD01)
14
1. Apparatus model/Product:
see label on first page
2. Name and address of the manufacturer:
Xylem Service Italia S.r.l.
Via Vittorio Lombardi 14
36075 Montecchio Maggiore VI
Italy
3. This declaration of conformity is issued under
the sole responsibility of the manufacturer.
4. Object of the declaration:
electric pump
5. The object of the declaration described above is
in conformity with the relevant Union harmoni-
sation legislation:
Directive 2014/30/EU of 26 February 2014
(electromagnetic compatibility)
6. References to the relevant harmonised stand-
ards used or references to the other technical
specifications, in relation to which conformity is
declared:
EN 61000-6-1:2007, EN 61000-6-3:2007
+A1:2011
7. Notified body: -
8. Additional information: -
Signed for and on behalf of:
Xylem Service Italia S.r.l.
Montecchio Maggiore, 11.03.2016
Amedeo Valente
(Director of Engineering and
R&D)
rev.01
Lowara is a trademark of Xylem Inc. or one of its
subsidiaries.
2 Transportation and Storage
2.1 Inspect the delivery
1. Check the outside of the package for evident
signs of damage.
2. Notify our distributor within eight days of the de-
livery date, if the product bears visible signs of
damage.
Unpack the unit
1. Follow applicable step:
– If the unit is packed in a carton, then remove
the staples and open the carton.
– If the unit is packed in a wooden crate, then
open the cover while paying attention to the
nails and straps.
2. Remove the securing screws or the straps from
the wooden base.
2.1.1 Inspect the unit
1. Remove packing materials from the product.
Dispose of all packing materials in accordance
with local regulations.
2. Inspect the product to determine if any parts
have been damaged or are missing.