HAPIMP PH810W Manual De Instrucciones página 15

2.2.Insert the Micro SD Card
The camera uses an Micro SD memory card to save photos (in
JPEG format) or videos (in AVI format). Micro SD cards up to
512 GB capacity are supported.
Insert the Micro SD card (with the camera's power switch in the
OFF position) before beginning to operate the camera. Don't
insert or remove the Micro SD card when the power switch is in
the ON position.Before inserting the memory card, please open
the front cover and make sure that the write protect switch on
the side of the card is OFF (NOT in the "Lock" position).
● Insert the Micro SD card into the card slot. A "click" sound
indicates the card is in successfully. If the wrong side of the
card is facing up, you will not be able to insert it without force
there is only one correct way to insert it.
● To take out the Micro SD card, please gently push in the card
(do not try to pull it out without pushing in first). The card is
released from the slot and ready to be removed when you hear
the click.
Notes:
● Be sure the camera's power is switched OFF before inserting
or removing Micro SD cards or batteries.
● Camera will not operate without an Micro SD memory card
installed.
3.CAMERA OPERATION
3.1.Turn On/Off the Camera
3.CAMERA OPERATION
9
English