Publicidad
Idiomas disponibles
Idiomas disponibles
"Trailcam Link" APP, the connection page may not be displayed
in time. Just need to click "The red light has flashed" again to
solve the problem.
2. This WiFi hunting camera will act as a WiFi hotspot without
the need to be connected to the router, which means that it will
act as its own network to which you can connect your mobile
phone using a free app""Trailcam Link"". The effective distance
between the hunting camera and your phone should be within
15 meters. Therefore, if you would like to download and watch
the recorded pictures and videos or set the menu on the phone,
you should turn on the Bluetooth and wifi functions within the
effective range (up to 15 meters) between your phone app and
the hunting camera.
3. While you're far away from the trail camera, you cannot
control the camera or download and watch the videos from the
app remotely. The trail camera will work just like a regular trail
camera and store images and videos onto the MicroSD after the
motion detector is triggered. When you get back to the camera,
reconnect the wifi and Bluetooth and app, and you will be able
to download and watch the recorded pictures and videos.
4.After the operation of the APP, it is suggested to click the
Power-off button in the upper right corner to shut down the APP.
The camera will enter the sleep-hunting mode to save battery
power;
5.When the product enters WiFi mode,if the mobile phone fails
to connect WiFi after 3 minutes,the product will automatically
enter sleep-hunting mode;
6.After the WiFi connection is successful, if there is no
information interaction between the camera and the mobile
phone, the camera will automatically disconnect after 3 minutes.
If you need to start the connection again, you need to follow the
steps to connect to WiFi again.
3.CAMERA OPERATION
19
English
Publicidad
