Publicidad
Idiomas disponibles
Idiomas disponibles
Audio recording
Opening this function, you can record sound while recording
video.
Shot lag
Set the time period that the camera should wait before reacting
to subsequent activation of the main sensor after the initial
recording. During the selected interval, the camera will not
record any images or videos. This prevents the memory card
from being filled up with too many recordings of the same event.
You can select between 5—59 seconds or 1—60 minutes.
Example: If shoot lag is set to 00:01:00, then regardless of
whether there is motion in front of the camera, the camera will
wait 1 minute after the capture/record trigger, and then wait for
the next trigger.
Side motion sensors
The two side PIR sensors provide a wider sensing angle and
enhance response time. However, in some situations, you have
difficulty removing the interfering twigs or avoiding the sunlight.
If so, you have the option to turn off the side sensors.
Sensitivity motion sensors
The sensitivity of the main motion sensor is set here. For
interior areas and environments with little interference, such as
branches blowing in the wind, select "High''. Select "Medium"
for exterior areas and environments with a normal amount of
interference, and select "Low" for environments with a high
level of interference.The temperature can also affect sensitivity.
The "High" setting is suitable for warm ambient temperatures,
whereas "Low" should be selected for cold Environments.
Tip: With a high sensitivity, movements of smaller animals and
objects are registered more quickly. Even at greater distances
to the moving objects, you still have a good chance of detection
with high sensitivity. Heat detection also improves with high
3.CAMERA OPERATION
21
English
Publicidad
