Publicidad
Idiomas disponibles
Idiomas disponibles
automatically increase the brightness of the infrared light.
Near, Middle, Far: These are to manually set the distance at
which a trail camera can illuminate an object with the IR LEDs.
For example, you set the IR distance to near, then the IR light
will dim and only illuminate the area that is relatively close to the
camera.
Notice: The farther the IR light illuminates, the brighter it is, and
the more power it consumes. Please choose it according to your
needs.
Time & date
Here you can set the date format (YYYY/MM/DD, DD/MM/YYYY
or MM/DD/YYYY), the time format (12/24 hrs) and the time and
date. Use the LEFT and RIGHT keys to move to the next field.
Use the UP or DOWN keys to change the setting, pressing the
OK button to save.
Photo stamp
Select "Time & date" to stamp each photo with temperature,
moon phase, date and time.
Select "Date" to stamp each photo with temperature, moon
phase, date.
Select "OFF" for no stamp.
Password protection
Select "On" if you want to use a password to protect the camera
from unwanted access. You can set a 4-digit combination. Once
the code is set, the camera will prompt you to enter the correct
code. If you forget the password, please contact the after-sales
staff to teach you to reset the camera.
WiFi SSID
You can modify the cameras WiFi name by modifying the WiFi
SSID. It will be displayed when WiFi is opened after modification
and the mobile phone can also search the WiFi SSID name.
WiFi Password
24
English
3.CAMERA OPERATION
Publicidad
