Jeep JAT Manual De Uso página 16

HANDLEBAR INSTALLATION
Check that the handlebar stem is positioned frontally and aligned with the front wheel and the
horizontal tube of the bicycle frame (fig.A).
Using a wrench with a 4 mm hexagonal Allen insert, gradually and alternately loosen the four
fixing screws of the front panel on the end of the handlebars stem by turning them anticlockwise
until they can be removed (fig.B).
Place the handlebars centrally in the dedicated housing on the handlebars stem body (fig.C)
and position the previously removed handlebars stem front panel in its original seat, inserting
and tightening lightly (turning clockwise) and alternately the fastening screws to set the desired
handlebars positioning.
Complete the installation of the handlebars by tightening the screws in the sequence indicated
until they are fully tightened (fig.D).
fig.A
fig.C
fig.B
fig.D
15
3 1
2 4