Jeep JAT Manual De Uso página 8

CAUTION
The installation of accessories and equipment on the bike, not only affect the performance of the
bike and how it is used, but can also cause damage if they are unsuitable, thus compromising
correct operation and safety conditions during use.
For information on the supply and installation of equipment deemed suitable for the bike, please
contact your authorised dealer or specialised operators.
Warnings for users
• The electrically power assisted cycle can only be used by adults and skilled teenagers.
• Do not take alcohol or drugs before riding the electrically power assisted cycle.
• Do not solicit higher performance characteristics of the electrically power assisted cycle with
respect to those for which it has been designed.
• Never ride the electrically power assisted cycle with any of its parts disassembled.
• Ride with both hands on the handlebars.
• Before use, replace any worn and/or damaged parts and check that the safety devices are
working properly.
• Keep children away from plastic items (including packaging materials) and small parts that
may result in suffocation.
• Supervise children to make sure they do not play with the product.
• Remove any sharp edges caused by misuse, breakage or damage to the item.
• Pay particular attention when riding the bike near pedestrians and make sure you slow down
and signal your presence to avoid frightening them when arriving from behind.
• Assemble the item correctly.
HOW TO USE
Jeep JAT is an electrically power assisted cycle designed and built for use in off-road contexts,
®
suitable for riding on technical nature trails and in the presence of slopes.
The electrically power assisted cycle is a bicycle fitted with an auxiliary electric motor that is
activated only when the pedals are turned.
Therefore, the motor does not replace the work performed by the rider's leg muscles, but assists
them to prevent excessive strain by activating according to the operating modes of the electrical
and electronic components supplied with the product, i.e. the battery, handlebars controls,
sensors and control electronics.
In detail, the electronic engine is battery-powered and controlled by a control unit which manages
the power output and the additional thrust to be provided to the muscular contribution originating
from the pedalling of the rider based on the reading of values provided in real time by a series of
sensors and according to the management parameters entered by the user through the controls
on the handlebars.
The electric motor supplied with the electrically power assisted cycle, in compliance with the
provisions of the European Directive 2002/24/CE, as well as being activated exclusively with
support purpose of the muscular pedalling function provided by the user and in a directly
proportional manner to the force applied by the same, it will deactivate when a speed of 25 km/h is
reached.
07