Type Plate; Device Layout - Mennekes AMTRON E Start Manual De Instrucciones Y De Instalación

3.2 Type plate

The type plate contains all important device data. The pic-
tured type plate is an example.
f Note the type plate on your device. The type plate is
installed on the housing base.
1
XXXXXXXXX
2
Typ.SN:
3
In : xx A
4
A
U : xxx V ~
5
n
f : xx Hz
6
n
IEC 61851, DIN IEC/TS 61439-7
7
8
Fig.: 2. Type plate (pattern)
1. Manufacturer
2. Type
3. Item / serial number
4. Rated current
5. Rated voltage
6. Frequency
7. Standard
8. Barcode
9. Number of phases
10. Protection class
11. Usage
6
xxxxxxxx.xxxxx
xP+N+
9
IPxx
10
AEVCS
11

3.3 Device layout

The enclosure of the device has three parts and consists of
bottom part, top part and front panel.
The design of the front panel depends on the version of
the device.
Front view
Fig.: 3. Front view (example: with type 2 charging socket
for use with separate charging cable)
1. Multi-function / stop button
2. LED Info bar
3. Fastening screws for upper housing part
4. Upper enclosure section
5. Energy meter with inspection window
6. Front panel
7. Key switch
1)
8. Type 2 charging socket with hinged lid
9. Pre-cut recess for supply cable / cable duct
Optional
1)
Î "3.4 Optional equipment"
For version with Type 2 charging socket without shutter
2)
only
Î "3.5 Device variants"
1)
1)
2)