Kohler Perfect Fill K-31795-NA Instrucciones De Instalación página 16

Ensamblaje de desagüe

Idiomas disponibles

9. Prepare the Wall - ON/OFF Switch

Ø 1-3/16"

6" (152 mm) Min -

12" (305 mm) Max

CAUTION: Risk of Product Damage. The ON/OFF Switch must be installed on a non-wet surface.

NOTE: The ON/OFF Switch must be installed on a flat and even wall surface, avoiding any grout lines.

NOTE: Route the cable so the cables can be serviced later.

NOTE: The recommended height is between 6" (152 mm) - 12" (305 mm) above the bath rim.

Mark the center of the ON/OFF switch location.

Drill a 1-3/16" (30 mm) hole at the center mark.

Route the cable through the center hole from the location where the Perfect Fill controller will be installed.

Using the provided cleaning wipe, clean the surface around the mounting hole.

1504928-2-A

Kohler Co.