Publicidad
Idiomas disponibles
Idiomas disponibles
10. Install the ON/OFF Switch
NOTE: The ON/OFF Switch cannot be adjusted once installed. Verify that the ON/OFF switch is oriented correctly before
installing.
Connect the cable from the wall to the back of the ON/OFF switch until the connector on the cable clicks into place.
Push the rubber grommet into place.
Carefully remove the paper from the adhesive back.
Position the power icon as shown. Press the ON/OFF switch firmly against the wall.
Kohler Co.
Front of Switch
Rubber Grommet
Incorrect
ON/OFF Switch Orientation
17
Correct
1504928-2-A
Publicidad
