CM HURRICANE 5623 Manual De Funcionamiento página 3

Hoist safety is up to you...
WARNING
CHOOSE THE RIGHT
HOIST FOR THE JOB...
Choose a hoist with the capacity for the job. Know the
capacities of your hoists and the weight of your loads.
Then match them.
WARNING
INSPECT
All hoists should be visually inspected
before use, in addition to regular,
periodic maintenance inspections.
Inspect hoists for operations warning
notices and legibility.
Deficiencies should be noted and
brought to the attention of supervi-
sors. Be sure defective hoists are
tagged and taken out of service until
repairs are made.
WARNING
USE HOIST
PROPERLY
Be sure hoist is
solidly held in the
uppermost part
of the support
hook arc.
WARNING
PRACTICE CAUTION ALWAYS
Do not lift co-workers
with a hoist.
Make sure everyone is
clear of the load when
you lift.
Do not remove or obscure
operational warning
notices.
VIOLATIONS OF ANY OF THE WARNINGS LISTED MAY RESULT IN SERIOUS PERSONAL INJURY
TO THE OPERATOR OR NEARBY PERSONNEL BY NATURE OF RELEASED LOAD OR BROKEN
HOIST COMPONENTS.
DO NOT LIFT MORE THAN RATED LOAD.
DO OPERATE WITH MANUAL POWER ONLY (ONE OPERATOR).
The application, the size and type
of load, the attachments to be
used and the period of use must
also be taken into consideration in
selecting the right hoist for the job.
DO NOT OPERATE DAMAGED OR MALFUNCTIONING HOIST.
DO NOT OPERATE WITH TWISTED, KINKED, OR DAMAGED CHAIN.
Under no circumstances should you
operate a malfunctioning hoist.
Check for gouged, twisted, distorted
links and foreign material. Do not
operate hoists with twisted, kinked,
or damaged chain links.
DO NOT PULL AT AN ANGLE. BE SURE HOIST AND
LOAD ARE IN A STRAIGHT LINE.
DO NOT USE LOAD CHAIN AS A SLING.
Be sure hoist and load are in a
straight line. Do not pull at an
angle.
DO NOT LIFT PEOPLE
OR LOADS OVER
PEOPLE
Remember, the hoist was designed
to ease our burden and
carelessness not only endangers
the operator, but in many cases, a
valuable load.
Load chain should be properly
lubricated.
Hooks that are bent, worn, or
whose openings are enlarged
beyond normal throat opening
should not be used. If latch does
not engage throat opening of
hook, hoist should be taken out of
service.
Chains should be checked for
deposits of foreign material which
may be carried into the hoist
mechanism.
Check brake for evidence of slip-
page under load.
Be sure load is hooked securely.
Do not tip load the hook. Do not
load hook latch. Hook latch is to
prevent detachment of load
under slack chain conditions only.
OPERATOR
SERVICE
CLEANING
Hoists should be kept clean and free
of dust, dirt, moisture, etc., which
will in any way affect the operation
or safety of the equipment.
LUBRICATION
Chain should be properly lubricated.
AFTER REPAIRS
Carefully operate the hoist before
returning it to full service.
Do not operate with hoist head
resting against any object. Lift the
load gently. Do not jerk it.
i