Publicidad
Idiomas disponibles
Idiomas disponibles
.5.5 - Operation in "Dehumidification" mode only
3
• When used in this mode, the air conditioner eliminates the humidity in the room.
This function can be extremely useful between seasons, particularly on rainy
days when the temperature is not uncomfortable but the excess humidity feels
unpleasant.
• In this mode, both room temperature and fan speed settings are ignored, which
correspond to minimum.
• Any indication of fan temperature and speed disappears from the remote control
display.
• To activate this mode, press the B4 key on the remote control several times until
the D4 symbol and the D1 automatic ventilation symbol appear on the display.
• In this operating mode it is normal for the air conditioner to function intermittently.
3.5.6 - Operation in "Ventilation" mode only
• When used in this mode the air conditioner does not perform any action with regard
to temperature and air humidity in the room.
• To activate this mode, press key B4 on the remote control several times until the
automatic ventilation symbol D1 appears on the remote control display.
3.5.7 - Operation in "Spa" mode only (Automatic)
• In this mode, the machine's temperature is automatically regulated according to
the room's temperature. The fan speed is also automatically regulated according
to the set temperature (except in dehumidification mode).
• To activate this mode, press the B4 key on the remote control several times until
the D7 symbol appears on the display.
.5.8 - Operation in "Heating" mode only (only models fitted with heating
3
pump)
• Using this mode, the appliance heats the room.
This function is only available for the versions with heat pump (HP).
• To activate this mode, press button B4 on the remote control several times until
the D2 symbol appears on the display.
• In this run mode, the required temperature and fan speed can be set. After three
minutes (maximum time) the compressor should start and the air conditioner starts
heating the room.
EN - 29
UNICO
Publicidad
