Dreame DreameBot L10 Ultra Manual De Usuario página 15

How to Use
Sweeping & Mopping
Note: When using the mop assembly for the first time, the robot performs the sweeping and mopping task by default.
1. Start sweeping and mopping
Press the button on the robot, or use the app to make the robot start from
the base station. Then the robot will plan the optimal cleaning route and
perform the cleaning task based on the created map.
Note:
·
The mop pads will be cleaned before the robot starts mopping. Please wait with
patience.
·
Do not move the base station, the clean water tank, the used water tank, or the
washboard during its working.
2. Return to clean mop pads midway
During mopping, the robot will automatically return to the base station to
wash mop pads based on the mop pad cleaning frequency specified on the
app. Then the base station will automatically refill the water tank of the robot,
and the robot will resume the cleanup after water refilling.
Note: If the robot returns to the base station to clean mop pads midway, the base
station will not automatically empty the dust bin.
EN
13