Mobiclinic TEIDE Manual De Instrucciones página 22

SPINNING BIKE TEIDE
ES EN FR IT DE PT NL SWE PL DK
Step 4
The saddle adjustment frame (7) is installed on the saddle support (4) and fixed with the flat washer (19),
a hexagon spanner (27) and an adjustment wheel (15). The saddle (8) must then be loosened slightly
with the spanner (25), placed on the saddle adjustment frame (7) and secured and tightened again with
the spanner (25).
Install the adjusting wheel (28) on the bicycle body (1) for further clamping.
NOTE: By loosening the height adjustment pin (15), the position of the saddle adjustment frame (7)
can be adjusted. After adjusting it to the corresponding position, it is necessary to tighten the height
adjustment pin (15) again. The adjustment wheel (28) serves to reinforce the clamping of the handlebar
support (5).
22