Vision Fitness T600 Manual Del Usuario página 8

• Open HARDWARE FOR STEP 3.
3
• Attach LEAD WI RE (4) to CON SOLE CABLE (5) and pull lead wire through RI GHT
CON SOLE M AST (6) . After pulling the lead wire through the m ast, the top of the
console cable should be connected to the M CB (14) .
Detach and discard lead wire.
• Attach CON SOLE BASE (9) to CON SOLE M ASTS (3 & 6) using 4 BOLTS (G) , and 4
CURVED WASHERS (H).
• Tighten all bolts from steps 1–3.
• Install M OTOR COVER (1)
G Bolt 4
H Arc Washer 4
9
1
A
3
SCREWS (A).
5
4
H
6
G
14
• Open HARDWARE FOR STEP 4
4
• Connect the CON SOLE CABLES (4) and HEART RATE WI RES (7) to the CON SOLE
(11) and carefully tuck the excess cable into the CON SOLE BASE (9) .
• Attach the CON SOLE (11) to the CON SOLE BASE (9) using 4 BOLTS (I ) and 4
SPRI N G WASHERS (J ) and 4 FLAT WASHERS (K).
I Bolt 4
J Spring Washer 4
K Flat Washer 4
11
4
K
J
I
9
7
7