Moni DRAGON Instrucciones De Uso página 14

•
The car seat does not replace a cot or a bed. Should your child need to sleep, then it should be placed in a suitable
pram body, cot, or bed.
•
Use the car seat in the rear-facing position until the child's weight exceeds 9 kg.
•
For maximum protection, the safest position in most cars the central position on the rear seat is recommended.
•
This car seat is placed in direction opposite to the direction of movement!
•
Always protect your child when it is in the car seat using the safety belt.
•
Do not leave the buckle partially closed, it should be locked when all parts are engaged.
•
Make sure that all belts attaching the restraint system to the vehicle are as tight as possible. Make sure that the
belts that secure the child are adjusted to fit the child's body, tightened as much as possible without causing
discomfort to your child and are not twisted.
•
It is very important to use the waist belt down low, so that the pelvis is firmly engaged.
•
Do not use the restraint system in a car with waist belt only.
•
Always check for unsecured objects behind the car seat or on the vehicle seat next to it, objects and luggage, which
can lead to injuries of the child in case of a sudden stop, collision or an accident. They must be removed or securely
fixed, at a safe distance from the car seat and the child.
•
The product must be fixed safely to the vehicle seat with the belts, even if it is not used, because otherwise in case
of an accident or a sudden stop of the vehicle, the car seat can injure the passengers in it.
•
Do not use other load bearing points, except for those described in the instructions and indicated on the car seat.
•
Make sure that all parts of the restraint system are fastened correctly in place and there is no danger during daily
use of the car, for them to get pinched in the adjustable seats and doors.
•
After a strong collision the car seat and belts can be damaged, that is why it is recommended for you to replace
them.
•
Do not make any changes, improvements and do not add new accessories or pads on the construction of the car
seat except for those approved by the manufacturer and without prior proof of an authorized organization. Please,
make sure that you follow carefully the instructions of the manufacturer, when you place and adjust this restraint
system.
•
Do not place additional cords or ties on the product to avoid the risk of suffocation.
•
If a damage of the car seat occurs do not try to remove it by yourselves, contact an authorized repair shop or the
importer.
•
The child restraint system must not be used without a cover (upholstery).
•
The cover (upholstery) of the child's car seat must not be replaced with a cover that has not been approved by the
manufacturer. The cover is integral part of the restraint system's safety.
•
If you leave your car exposed to direct sunlight, we recommend you to cover the car seat, because it and its plastic
parts can get overheated and deformed. Also, before you place the child in the car seat, check whether the car seat
is heated, in order to prevent it from burning itself.
•
Keep out of fire !
•
Dо not store the product in humid places and in direct sunlight.
•
Do not try to repair the car seat by yourselves. this may led to resulting damage, if it is not done by a professional.
•
The car seat can be installed in two basic positions: upright in the direction of movement for group 1,2,3 (9-36 kg)
and reclined in the opposite direction of movement for newborns and children up to 13 kg.
IMPORTANT! The diagrams and figures in this instruction are illustrative and indicative only.
MAIN PARTS OF THE CAR SEAT: 1. Headrest adjuster; 2. Headrest; 3. Hip pad; 4. Crotch strap; 5. Seat cushion; 6. Three-point
harness and buckle system; 7. Buckle pad; 8. Angle adjustment button;9.Pivot button; 10. Belt adjustment strap.
Class for use as group 0+ (0-13 kg): installation with three-point vehicle belt and seat belt (rear-facing).
Use the car's three-point seat belt to ensure the child's safety and secure the car seat.
1.Place the child seat on the car seat in the opposite direction of traffic.
2. Pull out the entire car seat belt.
3. Pass the diagonal belt between the backrest and headrest and lap belt through the belt guides on the bottom of
child's seat. Make sure that the both parts of the car belt are under the harness of the child seat.
4. Buckle the shoulder and lap belt into the buckle ( see sequence of steps in Figure B.1).
5. Place the child in the seat. Check the height of the shoulder belts. Make sure the straps are not twisted. Fasten the
seat belts, making sure they are well placed, and pull the strap in the center of the seat and tighten it. For added
MAIN PARTS OF THE CAR SEAT - PD
CHILD SEAT INSTALLATION: GROUP 0
+
(0-13 kg) - FIGURE B
14