Moni DRAGON Instrucciones De Uso página 15

comfort and safety when used by a newborn, you can place the soft seat cushion that comes with the car seat on the
bottom of the seat.
To fit the five-point seat belt, follow the steps in Figure B.1. Slot the two metal parts of the buckle connectors together.
Insert the two connectors into the top of the buckle until they engage securely and click into place.
Always check the harness is correctly locked by pulling the shoulder straps upwards. To release the harness, press the
red button on the buckle downwards.
To adjust the height of the seat's shoulder straps, follow the steps in Figure B.2. Pass the shoulder straps through
shoulder pads, then through the shoulder slot at the front of the seat. Push the straps right through the seat out at
the back.Pull the straps down to the bottom of the seat to the metal connectors at the back of the booster. Slide the
straps onto the metal connecter. If you need more length of the strap, at the front of the booster seat push the strap
lever, and at the same time pull the straps. To remove the straps do the above in reverse order.
To tighten and slacken the shoulder belts, follow the steps in Figure B.3.
TIGHTENNING THE HARNESS: Pull the shoulder straps upwards to remove the slack from the lap sections of the
harness. Now pull the adjuster strap until the harness is fully tightened. The harness should be adjusted as tightly as
possible without causing discomfort to your child. Straps should not be twisted. Ensure that the lap strap portion is
located as low as possible towards the lap – not around the stomach, so that the pelvis is firmly engaged. A loose
harness can be dangerous. Check the harness adjustment & tighten each time the child is placed in the seat
SLACKENING THE HARNESS: The harness is slackened by pressing the lever (under the seat cover) on the front of the
seat. Press down on the lever as you grip the two shoulder straps with your other hand. Pull the shoulder straps
towards you to loosen the harness. Take care when adjusting the shoulder straps that you do not trap the harness
adjuster strap as you press down on the lever
The ISOFIX anchorage points are located 2 ISOFIX metal anchorage points at the intersection between the seat and
the backrest of the vehicle under the upholstery and a hook and loop matt hook behind the vehicle seat. On both sides
of the seat, press the ISOFIX button and pull the ISOFIX connectors to the longest position. Slide the two ISOFIX
connectors firmly into the inserts until the ISOFIX connectors engage with a clicking sound on both sides. The ISOFIX
button should be green on both sides.
WARNING! The ISOFIX connectors are only inserted correctly if both ISOFIX buttons are marked green.
Press the child seat against the backrest, applying even pressure on both sides. Shake the child seat to make sure it is
securely fastened and check the green safety buttons again to make sure they are fastened.
1.Place the child seat on the car seat, it must be oriented in the direction of movement. 2.Push the ISOFIX attachment
mechanisms directly onto the metal hooks of the vehicle until a "click" is heard. The ISOFIX locking indicator should
show GREEN. 3.Press the child seat firmly into the backrest of the car seat. During this movement, the ISOFIX system
will tighten the child seat against the seat back and you will hear a clicking sound.4.Grasp the chair and check that it is
securely fastened or is not stable.
Class for use as Group 1 (9-18 kg): installation with ISOFIX/three-point vehicle belt and seat belt on the seat (forward
facing). The car seat can be installed with both the ISOFIX system and the vehicle's three-point seat belt. To install the
chair using the vehicle's three-point harness, follow the steps shown in Figure D.
Class for use as Group II (15-25 kg) and as Group III (22-36 kg): car seat belt/ ISOFIX (forward facing).
FASTENING THE 5-POINT SEAT BELT- FIGURE B.1
FITTING THE SHOULDER STRAPS HEIGHT - FIGURE B.2
TIGHTENING AND SLACKENING THE HARNESS- FIGURE B.3
INSTALLING THE ISOFIX SYSTEM - FIGURE C
CHILD SEAT USE WITH ISOFIX SYSTEM - FIGURE C.1
CHILD SEAT INSTALLATION: GROUP I (9-18 kg) - FIGURE D
CHILD SEAT INSTALLATION: GROUP II; III (15-36 kg) - FIGURE E
- FIGURE B.1
- FIGURE B.1
- FIGURE B.3
- FIGURE B.1
- FIGURE B.3
- FIGURE B.1
15