Moni DRAGON Instrucciones De Uso página 16

When using the seat for Group 2 and 3, the five-point seat belt on the seat, the buckle cushion and the additional
padding must be removed.
INSTALLATION WITH FIVE-POINT BELT
Place the child seat on the car seat, it must be oriented in the direction of travel. Position the shoulder belt through
the hook over the child's shoulder and the lap belt over the chair and the child's lap. Pass the belt through the lower
seat opening of the car seat and buckle the belt into the car seat buckle until you hear a "click". Check that the belt
buckle is locked by pulling the belt.
INSTALLATION WITH ISOFIX SYSTEM
1.Place the car seat on the car seat, it must be oriented in the direction of movement.
2.Push the ISOFIX attachment mechanisms directly onto the metal hooks of the vehicle until a "click" is heard. The
ISOFIX locking indicator should show GREEN.
3.Press the child seat firmly into the backrest of the car seat. During this movement, the ISOFIX system will tighten the
child seat against the seat back and you will hear a click.
4.Check if the seat is firmly secured or wobbles.
5. Place the child in the seat. Position the shoulder belt through the hook over the child's shoulder and the lap belt
over thes eat and the child's lap. Pass the belt through the lower seat opening of the car seat and buckle the belt into
the car seat buckle until you hear a "click". Check that the belt buckle is locked by pulling the belt.
❖ MAINTENANCE
1. Regularly check the locking, fixing and adjusting mechanisms, the belts and cover, in order to make sure that they are in
good working order, not worn or damaged and their use is safe.
2. If you find any fault or that any of the functions does not work, stop using he car seat.
3. The car seat must not be used without cover! It is integral part of the car seat and can be replaced only with an identical
one to the one provided by the manufacturer.
4. Do not use the car seat after an accident because it can have undergone structural changes which can make it very
dangerous. It is possible to have damage which are not visible. The inspection of a repair shop specialist is obligatory.
5. Do not expose the car seat to the harmful effect of direct sunlight, because this will lead to faster and untimely aging of
the plastic parts and fading of the cover.
6. Store the car seat at a place to which small children do not have access. Do not store it at a wet and dusty room with very
low or very high room temperature. Do not place other objects on the car seat while you store it, because this may lead to
damage of the product.
7. Check regularly the main parts before each use of the car seat.
8. If any technical problem occurs related with the normal use of the car seat, do not try to repair the product by yourselves.
Contact the shop, from which you bought It or authorized service center.
❖ CLEANING
1.The cover can be removed and cleaned with soft cleaning agent in a washing machine at delicate fabrics cycle (30°C).
Please, see the instructions of the washing label, sewn to the cover. The colours of the cover can fade if it is cleaned at more
than 30°C. Do not use spin dryer and tumble dryer (the fabric can get separated from the wadding).
2. Part of the chair is plastic and can be cleaned using warm water and soap. Do not use strong detergents (for example
solvents).
3.The safety belt can be removed and be cleaned with lukewarm soapy water. Warning! Never remove the locking tongues
of the harnesses.
4.Make sure that during cleaning no soap enters the buckle or any adjusting or guiding part.
5.Do not use chemical cleaning agents, bleach or abrasive agents, in order to clean any part of the car seat.
6.Always after cleaning let the car seat dry completely and afterwards use it or store it.
7.Avoid wetting the labels. Do not remove them, because they contain important information.
Warning! The child's car seat must not be used without the cover. If you have to replace the cover of the car seat, please,
make sue that you use the original cover, because this is important for the correct operation of the restraint system. In order
to replace with an original cover, contact the commercial agent you bought this product from the importer or manufacturer.
INSTRUCTIONS FOR MAINTENANCE AND CLEANING
Manufactured for MONI in PRC
Manufacturer and Importer: Moni Trade Ltd.
Address: Bulgaria, Sofia, Trebich, 1 Dolo Str.,
Phone number: 003592/936 07 90
Website: www.monib.bg
16