Publicidad
Idiomas disponibles
Idiomas disponibles
4.
Product description
4.1
Scope of supply
Art. no.
Designation
GA836
ELAN 4 electro Micro sagittal saw
TA014429
Instructions for use of ELAN 4 electro micro sagittal
saw GA836 (leaflet)
4.2
Components required for operation
■
Operation-ready ELAN 4 electro control unit GA800, see TA014401
■
ELAN 4 saw blade sagittal GP491R to GP497R
4.3
Operating principle
The oscillating movement of the saw blade cuts through bone and carti-
lage.
The oscillation frequency can be adjusted continuously by the man-
ual/foot control.
The recommended max. oscillation frequency for sawing is 16 000 min
The tool holder can be locked in five different positions without requiring
a wrench (-90°/-45°/0°/45°/90°).
No wrenches are required for coupling/uncoupling the saw blades.
5.
Preparation
Non-compliance with the following instructions will preclude all respon-
sibility and liability in this respect on the part of Aesculap.
►
Do not use products from open or damaged sterile packaging.
►
Prior to use, inspect the product and its accessories for any visible
damage.
►
Use the products and their accessories only if they are in perfect tech-
nical condition.
6.
Working with the applied part
Risk of infection and contamination!
Applied parts, motor cable and sometimes also
tools are delivered unsterile!
WARNING
►
Carry out sterile processing of the applied parts,
motor cable and unsterile tools prior to use, in
accordance with the instructions for use.
Risk of injury and material damage due to inadver-
tent activation of the applied part!
►
WARNING
Secure applied parts that are not actually used
against inadvertent activation ("Off" position),
see instructions for use for ELAN 4 electro con-
trol unit GA800 (TA014401).
Risk of injury and material damage due to inappro-
priate use of tools!
►
Always follow the safety advice and information
WARNING
given in the instructions for use.
►
When coupling/uncoupling, handle tools with
cutting edges with care.
-1
.
Damage to the product if dropped!
►
Use the products only if they are in perfect
technical condition, see Function check
WARNING
Risk of burns to skin and tissue due to blunt tools/
lack of maintenance of the applied part!
►
WARNING
Use tools only if they are in perfect condition.
►
Replace blunt tools.
►
Ensure correct maintenance of the applied part,
see Maintenance.
5
Publicidad
