Enraf Nonius EN-Tree P Instrucciones De Uso página 31

9 Maintenance
Cleaning
The steel undercarriage can be cleaned with a damp cloth and a (nonabrasive) liquid household
•
cleaner
Maintenance
To keep the leather parts flexible, you can use leather fat.
•
After some time, the sliding and turning parts could run less smoothly, because of pollution and
•
dehydration. You can re-grease the Pulley with ball bearings grease (which you can obtain at a
bicycle shop). If required, the guiding bars of the weights can be greased with a little oil.
Check the cord and the cord fixations regularly for signs of wear. In case of excessive wear and
•
tear, the cord must be replaced and use of the EN-Tree Pulley is not recommended until the cord
has been replaced.
In order to obtain spare parts, please contact your supplier.
•
We recommend to have the EN-Tree P checked yearly by authorized personnel of Enraf-Nonius or
•
by its authorized distributor. The manufacturer will not be held responsible for the results of
maintenance or repairs by unauthorized persons!
Expected service lifetime
This device will remain suitable for its intended use as long as it is subjected to yearly maintenance by
a qualified service engineer as described in the service manual.
The service engineer will decide whether the device is suitable for use according to the specifications.
End of life
Your EN-Tree P contains materials which can be recycled and/or are noxious for the environment.
At the end of the duration of life, specialized concerns can take apart the EN-Tree P and sort out the
noxious materials and materials for recycling. By doing so you contribute to a better environment.
Please ensure that you are well informed of the local rules and regulations regarding
the removal of equipment and accessories.
Page 13 of 16 EN109-1400755-48 IFU