Publicidad
Idiomas disponibles
Idiomas disponibles
3. PREPARATION FOR USE
1.
INITIAL
CHECKS
Before shipping, the instrument has been checked from an electric as well
as a mechanical point of view. All possible precautions have been taken so
that the instrument is delivered undamaged. However, we recommend
generally checking the instrument in order to detect possible damage
suffered during transport. In case anomalies are found, immediately
contact the forwarding agent. We also recommend checking that the
packaging contains all components indicated in § 7.3.1. In case of
discrepancy, please contact the Dealer. In case the instrument should be
returned, please follow the instructions given in § 8
2.
DURING
USE
Please carefully read the following recommendations and instructions:
•
Failure to comply with the caution notes and/or instructions may
damage the instrument and/or its components or be a source of
danger for the operator.
•
The symbol " " indicates that the batteries are low. Stop testing and
replace or recharge the batteries according to the indications given in
§ 6.1.
•
When the instrument is connected to the circuit being tested, never
touch any terminal, even if unused.
3.
AFTER USE
When measurements are completed, turn off the instrument by pressing
and holding the ON/OFF key for a few seconds. If the instrument is not to
be used for a long time, remove the batteries.
4.
POWER SUPPLY
The instrument is powered by 2x1.5V batteries type AA IEC LR06 or
2x1.2V NiMH type AA rechargeable batteries. The condition of low
batteries corresponds to the appearance of "low battery
display. To replace or recharge the batteries, see § 6.1
5.
STORAGE
28
CAUTION
SOLAR03
" on the
Publicidad
