Publicidad
Idiomas disponibles
Idiomas disponibles
GB
Problem
The lid of the vacuum con-
tainer, the silicone seal or the
valve are positioned incor-
The pump does not
rectly.
create a vacuum
The silicone seal or the con-
when placed on
tainer valve are dirty or wet.
a container or the
vacuum does not
last.
The pump sits too loosely on
the valve.
48
Possible cause
Troubleshooting
Remedy
Check that the positioning is correct
and that the lid is properly closed.
Clean and dry the silicone seal and the
valve of the container.
During vacuum sealing, lightly press
the pump into the dock surrounding the
valve to create a tight seal between the
pump and the valve.
Publicidad
