Invacare Matrx MX2 Back Manual Del Usuario página 8

3.4 PRIVACY FLAP (Sold Separately)
Privacy Flaps are available (sold separately) for use with all standard sized
MX2 backs. All standard sized backs come with a pre-sewn loop strip across
the bottom rear of the cushion cover for installation of the privacy flap.
Width
14 in. (36cm)
15 in. (38cm)
16 in. (41cm)
17 in. (43cm)
18 in. (46cm)
4.0 C
ARE AND
4.1 INSPECTION AND MAINTENANCE
WARNING! Risk of Injury or Damage
DO NOT continue to use this product if problems are discovered. Corrective
measures can be performed at, or arranged through your service provider.
WEEKLY: Inspect ALL fasteners weekly to ensure that mechanical connections
and attaching hardware are tightened securely.
MONTHLY: Perform a visual inspection of parts including hardware, brackets,
upholstery materials, foam, and plastics for deformation, corrosion, breakage,
wear or compression.
4.2 CLEANING/LAUNDERING:
The outer cover on the MX2 Back is made of a breathable spacer mesh, combined
with a leatherette material for added durability. Regular cleaning and inspection of
the outer cover is recommended.
WARNING! Risk of Injury or Damage
To avoid infectious exposure, inspect cushion thoroughly and properly clean and
disinfect any materials soiled with bodily fluids.
CAUTION! Risk of Damage
- DO NOT use cleaning agents containing phenols, alcohols, bleaches or
other abrasive materials. Otherwise product damage may occur.
- 1% Chlorine Solution used on a regular basis can diminish the life of the cover
if not rinsed and dried properly. Do not use granules.
- All cleaning agents and disinfectants used must be effective, compatible with one
another and must protect the materials they are used to clean.
- Keep clear of open heat sources during cleaning.
Privacy Flap
PFLAP-XS
10" x 16" (26 x 41cm)
PFLAP-S
13" x 16" (33 x 41cm)
P-FLAP-M
15" x 16" (38 x 41cm)
M
AINTENANCE
- 8 -
loop
strip
double-sided hook adapter
Privacy Flap
hook
strip