Create BBQ GRILL IN&OUT Manual Del Usuario página 9

1. Top ventilation hole
2. Grill plate
3. Grill plate rails
4. Resting tray
5. Drip tray
Setting
1. Installation:
Remove the product from the packing box and check whether the product is damaged or
not. After confirming there is no damage, install the stainless steel hanger into the grill
area.
2. Standby status:
Connect the power supply and press the power switch on the left side. The display lights
are on for 1 second and the buzzer sounds. The product is in standby mode as the power
indication light is in red.
3. Temperature setting:
PARTS LIST
6. Display panel
7. Power cord
8. Current fuse
9. Power switch
10. Power indicator light
OPERATION AND USE
11. Heat indicator light
12. Timer indicator light
13. Temperature display
14. Control knob
15. Time display
E NGLI SH
9