Porsche Home Energy Manager Manual Del Usuario página 18

Initial Commissioning by Customer Service
Initial Commissioning by Cus-
tomer Service
After installing the energy manager, the device must
be configured for initial commissioning.
Information
Initial commissioning may only be performed by a
qualified electrician.
During initial commissioning, an installation wizard
in the Web Application guides you through the nec-
essary settings (e. g. connections, user profile, opti-
mized charging). Some of the settings made here,
such as for the system and maintenance, can also
be changed later by the home user. The electrician
must perform the home setup within the installation
wizard. This includes the configuration of the current
converters and the addition of EEBus devices.
The energy manager is then ready for operation.
Requirements for initial commissioning
The following information should be available for set-
ting up the energy manager:
– Access data letter for registration to the Web
Application
–
Private data such as the access data of your
home network and the access data of the user
profile (for linking with your Porsche ID) do not
have to be provided.
–
Information on electricity tariffs/prices and, if
applicable, feed-in tariffs
Information
Only the letter containing access data is necessary
for partial commissioning. All other settings can also
be made subsequently.
16
The following browsers are supported by the Web
Application:
–
Google Chrome from version 57 (recommended)
– Mozilla Firefox from version 52 (recommended)
– Microsoft Internet Explorer from version 11
– Microsoft Edge (recommended)
– Apple Safari from version 10
e
The detailed description of the installation assis-
tant with all the steps can be found in the on-
line version of the installation instructions on the
Porsche website at the following address:
https://tinyurl.com/porsche-e-help