Porsche Home Energy Manager Manual Del Usuario página 24

Start first installation
1. Activate Powerline Communication .
2. Add the energy manager to the PLC network:
– Option 1: using the pairing button
–
Press the pairing button on the PLC
modem.
– Within 60 seconds, select the Connect
button in the Web Application.
– Option 2: entering the security code on the
energy manager
– In the Web Application, select the op-
tion Establish connection with PLC se-
curity key,
–
Enter the security code of the PLC mo-
dem.
–
Select the button Connect.
–
Option 3: entering the security key on the
PLC modem
Note: A PLC modem with HomePlug stand-
ard is required for this purpose (not included
in the scope of supply). This option is only
possible if no other PLC connection has ex-
isted before.
– Enter the security code of the energy
manager in the PLC modem to register
it in the PLC network.
–
Select whether the IP address should
be automatically assigned (recom-
mended) or statically defined.
�� When assigned automatically, the IP ad-
dress appears as soon as the connection to
the network has been established.
22
Establish direct PLC communication with the
charger:
1. Activate the DHCP server in the Web Applica-
tion.
– or –
Press the PLC pairing button on the Home En-
ergy Manager for more than 10 seconds to acti-
vate the DHCP server.
2. Select the button Connect in the Web Applica-
tion.
– or –
Briefly press the PLC pairing button on the Home
Energy Manager .
3. Select the PLC pairing button on the charger
within 60 seconds (Settings e Networks
e PLC).
Information
Interfering power consumers, power network equip-
ment or an unsuitable network topology can cause
temporary or permanent PLC communication fail-
ures.
Ethernet
The data is sent via an Ethernet cable, which con-
nects the energy manager with the network (e. g.
network router). When a connection is established,
an IP address is automatically assigned to the energy
manager.
1. Connect the Ethernet cable to the energy man-
ager (port ETH0).
2. Select whether the IP address should be auto-
matically assigned (recommended) or statically
defined.
6. Set up user profiles
Information
If you do not yet have a Porsche ID, you can create
one first. The Porsche ID can be linked at a later time.
To do this, go to Connections > User profiles. To
transfer data to your Porsche ID account, the device
must be connected to the internet.
Information on the energy manager can also be called
up in your Porsche ID account. To do this, the energy
manager must be linked with the Porsche ID.
b The energy manager has an internet connection.
1. Select the buttonLink Porsche ID.
�� The dialog Link user account is opened.
2. Depending on whether there is an internet con-
nection, select the following option:
Option Explanation
b End device with internet
To My Porsche
connection
e
You will be forwarded di-
rectly to the Porsche ID ac-
count login page.
b End device without internet
Additional op-
tions
connection
e
Scan the displayed QR code
or manually enter the dis-
played URL in the browser
using an end device that has
an Internet connection.
e
On the website for the Porsche ID account, enter
the login data (Porsche ID, password).