Publicidad
Idiomas disponibles
Idiomas disponibles
PLAYING
BACK A TAPE
II
DOLBY NR--
[]
DIRECTION/
PRESET
DOWN
I_1_ UP
Insert a tape.
1 Press the DOLBY NR button and turn Dolby NR
on or off to match the playback
tape.
ODNR
MUSIC SENSOR
tf there
is a 4-second
or longer
blank between
each track,
a
search
for the beginning
of the current
or next
track during
playback
can be done easily.
When the I_ indicator
of the -<11_ button
is flashing,
press
the I_1_
button
to move to the next track or the _1_1 button to
move to the beginning
of the current track.
When the •
indicator
of the 41_
button
is flashing,
press
the 4_11 button to move to the next track, or the Ib-I_ button to
move to the beginning
of the current track.
The search
function
uses a music sensor
that may not be able
to detect tracks for tapes with:
• Blanks of less than 4 seconds
between
tracks
• Noisy blanks
• Long passages
of low-end
sound
• Low overall
recording
levels
CONTINUOUS P LAY
For tapes recorded
with DOLBY
NR, turn on 13rJNR.
For tapes recorded
without
DOLBY NR, turn off _
NR.
2 Press the <I I_ button to start play.
The tape
counter
indicates
the tape running
length.
Playback
side of the tape
I_:
The front side is being played
(forward).
• :
The back side is being played
(reverse).
When
tapes
are loaded
in both decks
Press the TAPE button first to select
a deck.
The selected
deck number is displayed.
To stop play, press the [] button.
To pause
play (deck
2 only), press the II button.
To resume
play, press again.
To change
the playback
side,
press the _11_
DIRECTION/
PRESET
button in play or pause mode.
To fast
forward
or rewind,
press the -,14
or I_1_
button
in
stop mode.
Then press the [] button to stop the tape.
To start play when the power is off (Direct Play Function)
P_ess the TAPE button. The power is turned on and play of the
inserted tape begins.
To set the tape counter
to OOOO
Press the [] CLEAR button
in stop mode.
The counter
is also set to 0000 when
the cassette
holder
is
opened.
2
3--
1m
Q
4
--1
After playback
on one deck finishes,
the tape in the other deck
will start to play without
interruption.
1 Insert tapes into deck I and deck 2.
2 Press the TAPE/DECK1/2
button
to select the
deck to be played back first.
3 Press the REV MODE button to select _).
4 Press the _11_ button to start playback.
Playback
continues until the [] button is
pressed.
ENGUS. 10
Publicidad
