Descargar Imprimir esta página

Aiwa NSX-AV800 Manual De Instrucciones página 15

Ocultar thumbs Ver también para NSX-AV800:

Publicidad

Idiomas disponibles

Idiomas disponibles

DUBBING A TAPE MANUALLY
DUBBING THEWHOLE TAPE
1,4
_
--2
Preparation
• Set the tape to the point where recording
will start.
• The reverse
mode is automatically
set to _.
Note that recording
will be done on one side of the tape only.
3--
2--
m2
This function
allows
you to make exact copies
of both sides of
the original
tape.
The
reverse
side
of both
tapes
will start
simultaneously
as soon as the longer tape has been reversed.
1 Press the TAPE button.
2 Insert the original tape into deck 1 and the tape
to be recorded on into deck 2.
Insert the tapes with the sides to be played
back or recorded
on first facing out from the unit.
3 Press the DOLBY NR button to turn off the Dolby
NR.
1311 NR on the display
goes out.
4 Press
the TAPE/DECK
1/2 button
to select
deck 1.
TAPE 1 is displayed.
5 Press the Q REC/REC
MUTE button
to start
recording.
Playing and recording
start simultaneously.
To stop dubbing
Press the • button.
To set the Dolby NR when playing back the dubbed tape
Press the DOLBY NR button and turn Dolby NR on or off to
match the original tape,
• Dubbing
does not start from a point halfway
in the tape.
• The reverse
mode is automatically
set to _).
• The Dolby NR does not affect recording.
1
2
Press the TAPE button.
Insert the original tape into deck 1 and the tape
to be recorded on into deck 2.
Insert each tape with the side to be played
back or recorded
on first facing out from the unit.
Press the SYNC DUB button once or twice to start
recording.
(!) For recording
at normal
speed,
press it once to display
N-DUB.
_> For recording
at high speed,
press it twice to display
H-
DUB.
The tapes are rewound
to the beginning
of the front sides,
and recording
starts.
To stop dubbing
Press the • button.
To set the Dolby NR when playing back the dubbed tape
Press the DOLBY NR button and turn Dolby NR on or off to
match the original tape.
• Recording
does not start, if the erasure prevention
tab on either
side of the tape is broken
off.
• If the leader
segment
of the tape to be recorded
on is longer
than
that of the original
tape,
recording
on the reverse
side
may stop midway through the recording.
In this case, dub each
side manually
following
the procedure
in "DUBBING
A IAPE
MANUALLY".
ENGLISH 14

Publicidad

loading