Publicidad
Idiomas disponibles
Idiomas disponibles
CONNECTIONS
IMPORTANT
Connect equipment, antennas, and other optional equipment be-
fore connecting the AC cord.
CONNECTING THE SUPPLIED
SPEAKERS
You can obtain a front surround effect.
Connect the speakers to the SPEAKER terminals and the SUR-
ROUND SPEAKERS jacks of the main unit.
To connect to the SPEAKERS terminals
Connect the right speaker ( to the R terminal, and the left speaker
@ to the L terminal with the cords attached to the speakers.
Open the levers of the SPEAKER terminals and insert
the conductors
of the cords with white stripes to ® and the conductors of the black
cords to ©.
Then, shut the levers to lock.
To connect to the SURROUND SPEAKERS jacks
Use the supplied yellow-black cords.
the
r
Push the levers of each terminal, and insert the conductors of the
yellow cords to ® and the conductors of the black cords to ©. Then,
release the levers to lock.
h
Connect the speakers to the SURROUND SPEAKERS jacks with
the plugs of the connecting cords.
Right speaker @ should be connected to the R jack, and left
speaker @ to the L jack.
¢ The speaker systems are magnetically shielded. However, ifthe
speakers should affect the colour onyour TV screen turn off the
TV and turn it on again 15-30 minutes later. If the TV screen still
has poor colour move the speakers away from the TV.
* Do not leave magnets or objects generating magnetism near the
speakers.
CONNECTING THE AC CORD
Connect the AC cord to an AC outlet.
A demonstration of the unit's preset functions begins in the display
window (DEMO mode). This demonstration can be cancelled.
Refer to "DEMO MODE" on page 22.
Also, the Il SET button flashes to inform you that the current time
needs to be set. Refer to "SETTING THE CLOCK" on page 24.
If setting up with optional equipment, connect the other equipment
before connecting the AC cord.
To be continued.
Publicidad
