Publicidad
Idiomas disponibles
Idiomas disponibles
DOLBY NR
DIRECTION/PRESET
REV MODE
TAPE PLAYBACK
BASIC OPERATIONS
This unit has two tape decks.
On deck 1, tapes are always played back on both sides.
On deck 2, you can select reverse mode to play back one or both
si
1
ND
i?)
py
ides.
Press the TAPE/DECK 1/2 button.
The power is turned on and the button lights in red.
If a tape is inserted
You can turn the unit on and begin playback by pressing the
TAPE/DECK 1/2 button (direct play function).
Open the cassette holder by pressing the EJECT 4
mark and insert a tape exposed side down.
Push the cassette holder to close it.
The deck whose number, 1 or 2, is displayed can be operated
by the deck operation buttons.
When tapes are inserted in both decks
The tape in the deck closed last will be played. To switch the
deck number, press the TAPE/DECK 1/2 button.
Set DOLBY NR to match the playback tape.
For tapes recorded with DOLBY NR, press the DOLBY NR
button to turn on OO NR.
For tapes recorded without DOLBY NR, press the DOLBY
NR button to turn off OO NR.
Press the <4 button to start playback.
Playback starts from the side facing you.
To select a reverse mode (deck 2 only) > EN
Each time the REV MODE buiton is pressed, the reverse mode
changes.
To play one side only, turnon =.
To play both sides once only, turnon =).
To play both sides repeatedly, turn on C=).
When tapes are loaded in both decks, the =) indicalor means
"CONTINUOUS PLAY".
(See page 44.)
When playback starts from the back side
On deck 1, the back side is played back once and stops.
On deck 2, the back side is played back once and stops, even if =)
is selected
To stop playback
P
T
ress the Il button.
'o pause (deck 2 only)
Press the Bl button.
The Il button flashes.
To resume play, press it again.
To fast forward or rewind
In stop mode, press the << DOWN or >
UP button,
To stop fast forward or rewind, press the Il button.
Publicidad
