Publicidad
Idiomas disponibles
Idiomas disponibles
TIMER
SETTING THE TIMER
Odo
4
O
oof
—r™mOOdO0
¢ Make sure the clock is set correctly. (See page 24.)
* Note that the timer-on period is factory-set to 60 minutes. This
period can be changed during timer setting.
press the TIMER button again.
|
Tee
P
If you proceed to step 2 after TIMER in the display goes out,
s
another operation may start.
4
2 Press the Il SET button.
The hour in the display flashes.
3 Press the << DOWN or» UP button to designate
the hour of the timer-on time.
a
2
SET
heeens
4
Press the Ill SET button to set the hour.
The hour stops flashing and the minute starts flasting in the
display.
(ate)
—
4
6 Press the Il SET button to set the minute.
The minute stops flashing in the display.
TIMER and one of the source names flash alternalely in the
display for 4 seconds. Go to step 7 within these 4seconds
to select a source.
ar
:|
7 Press
one of the function
buttons
to select a
é
source.
:
The selected source name and TIMER flashes in tsrn in the
ie
display.
P
After 4 seconds, TIMER in the display goes out and tiner setting
is completed.
If you selected the timer recording mode in step 1
Only the TUNER or VIDEO/AUX function can be seected.
If you press the TUNER/BAND button
The tuner function is selected, but bands cannnot by selected
in this step. Go to step 8, and select a band.
ae
ay
7
DECK 1/2
BAND
oe
ee
ve
To be ;ontinued.
Publicidad
