Publicidad
Idiomas disponibles
Idiomas disponibles
DISC
r- DIRECT PLAY
ARO
DIRECTION
PRESET
CD PLAYING
PROGRAMMED PLAY
The CD player has a built-in memory function that allows play of up
to 30 tracks over three discs in any order.
1 Press the PRGM button in stop mode.
The PRGM indicator flashes in the display.
Press one of the DISC DIRECT PLAY buttons to
select a disc.
No
The selected disc is indicated in red in the display.
Go to the next step when the tray stops rotating.
ao
Press the numeric buttons and the +10 button to
program a track.
Example:
@ To select the 6th track, press the 6 button.
©@® To select the 16th track, press the +10 button and then
press the 6 button within 4 seconds.
© To select the 20th track, press the +10 button twice and
then press the 0 button within 4 seconds.
When each track selected, the display @ is shown.
In a few
seconds, the display changes to ©.
@ Program number
@ Disc number
@® Selected track number
The display changes after a few seconds.
@ Total playing time of the selected tracks
© Total number of selected tracks
4 Repeat steps 2 to 3 to program other tracks.
5 Press the <> button to start play.
To check the program
Each time the «<4 DOWN or ®» UP button is pressed before
playing, a disc number, a track number, and a program number will
be displayed.
To clear the program
Press the i CLEAR button before playing or press the 4 OPEN/
CLOSE button.
To add tracks to the program
Before playing, carry out steps 2 and 3. The track will be pro-
grammed after the last track.
To change the programmed tracks
Clear the program and carry out ail the steps again.
° The DISC CHANGE button does not operate during progammed
play.
¢ During programmed play, the remaining time is not displayed
when the CD EDIT/REMAIN button is pressed.
¢ Random play cannot be combined with programmed play.
Publicidad
